TZP 95 Yttrium Stabilized Zirconia Beads Oxide Balls 0.6 - 0.8mm 0.9 - 1.1mm
|Place of Origin:
Payment & Shipping Terms:
|Minimum Order Quantity:
|3-5 days after order confirmed
|L/C, T/T, Western Union, MoneyGram
|300mts per year
|95 Yttrium Stabilized Zirconia Beads
|95 Zirconia Beads
Stabilized Zirconia Beads Oxide Balls,
TZP 95 Yttrium Zirconia Beads Balls,
0.8mm Zirconia Beads Balls
TZP 95 Yttrium Stabilized Zirconia Beads Zirconium Oxide Balls 0.6-0.8mm 0.9-1.1mm 1.0-1.2mm
1. Product Description of 95 Zirconia Beads
Zirconia beads selects the high quality micrometer and sub-nanometer zirconia powder and yttrium
oxide as the main material,then made by process of pressure rolling forming and high-temperature
Its crystal shape is tetragonal zirconium oxide,also called "TZP" zirconium bead, which is mainly used
for ultra-fine grinding and dispersion of materials requiring "zero pollution" and high viscosity and hardness.
2. Main Technical Data of 95 Zirconia Beads
|Typical Chemical Index
|Main Physical Index
95 Zirconia Beads
|True Gravity ≥6.0g/cm3
|Bulk Density ≥3.7g/cm3
|Vicker Hardness ≥1100 HV
|compressive strength ≥2.0KN Φ2mm
|Zirconia Beads Specification
|Special Specification can be customized
3. Main Application of 95 Zirconia Beads Grinding Media
Widely used for the ultra-fine grinding and dispersion of ink, paint, coating, non mineral, dye,
pigment, pesticide, titanium dioxide, electronic ceramics, medicine and other industries;
4. Why 95 Zirconia Beads Grinding Media is one high efficiency grinding media?
The specific gravity of 95 zirconia bead is 6.0-6.1g/cm3, so the impact energy is strong, which greatly
improves the grinding efficiency.
During the grinding process, it can obtain higher outlet speed and flow rate, reduce the number of cycles,
shorten the grinding time, improve the grinding efficiency and achieve ideal grinding effect.
5. Precautions for using 95 Yttrium Stabilized Zirconia Beads
Select the appropriate zirconia beads
Select the appropriate zirconia beads according to the type and target particle size of the material to be ground.
When using 95 zirconia beads for the first time, pre-ground in the slurry with a certain viscosity for 30 minutes
is required. If the slurry concentration is low, the rotation speed should be reduced, and then the time should not
be exceeded 15 minutes.
When the treated material is paint, it is recommended to clean the zirconia beads with resin. If using the solvent,
then the rotating speed should be reduced, and the time should not be exceeded 10 minutes. Also suggest
to clean the zirconia beads intermittently, that means, turn off and start again after a period of time
Adding new grinding beads
During the grinding process, zirconia beads will collide with each other,and occur a certain abrasion, so some
new zirconia beads need to be added as a supplement after some time.
Please screen out the broken zirconia beads before supplement, and add the same weight of zirconia beads with
the broken one.
Other Moments to add the new beads
a certain new zirconia beads need to be added If the grinding time needs to be extended or the grinding fineness
cannot achieve the desired effect without changing the grinding fineness requirements.
6. Why Choose us?
Professional Manufacturer,Multiple Authentication
Certificated by ISO9001 ISO14001,SGS,ROHS
Guaranteed Product Quality
All products is traceable from the very beginning of raw material to the final products,each shipment
will be tested even for one some quantity sample,providing good quality & stable performance;
High price/performance Ratio
Our plant is located in mountain area,with competitive environmental costs and staff salaries,finally
providing more competitive price;
Flexible Cooperation models
We will provide flexible cooperation model and payment terms no matter you are the final users or distributor etc.